October 2024, Vol. 251, No. 10
Features
Heavily Corroded Half-Mile Oil Pipeline Restored with Composite Wrap
By Chloe Hirst, Senior Writer, Belzona
(P&GJ) — An underground oil pipeline at a Refinery in Spain was suffering from severe corrosion. If left unchecked, the pipeline, 2,860.8 feet (872 meters) in length, would have incurred severe metal loss. As a result, disastrous consequences, both financially and also from an environmental perspective, would have ensued.
A prompt repair was required for the carbon steel 22-inch (55.9 cm) pipeline, in order to mitigate any further corrosion damage being incurred. In fact, if left unchecked, this would have caused the substrate to completely corrode through and, therefore, serious environmental issues would have ensued.
A potential solution would have been to completely replace the pipeline. However, considering its mammoth length, this process would have required considerable financial expenditure and, furthermore, would incur a hefty carbon footprint.
For every ton of steel that is produced, 1.85 tons of CO₂ – nearly double the amount – is released back into the atmosphere. In addition to this, the process of removing and disposing of the damaged pipeline further ratchets up the carbon footprint of this process.
As well as the environmental impact of replacing the corroded pipeline, this process would also require a considerable period of downtime which would lead to further profit-loss. The combination of these factors, costly in both a financial and environmental sense, led the Customer to seek out an alternative solution to replacing the steel pipeline.
Expense Lessened
The customer decided to repair and protect the pipeline with a combination of polymeric technology in order to bypass the drawbacks associated with replacing the pipeline.
The following systems were specified and applied following an inspection from Elena Expósito Fernández, AMPP (NACE) certified coating inspector Level 2 and Technical-Commercial Delegate at Belzona distributorship:
“The two-part epoxy paste, Belzona 1111 (Super Metal), was specified to fill in any gaps in the weld seams to ensure the pipeline had a smooth profile. For heavily corroded areas, plate bonding was required using steel plates, which were 19.9 by 23.6 inches 50 cm x 60 cm) in size, with a thickness of 0.2 of an inch (5 mm). These were bonded into place using the epoxy structural adhesive, Belzona 7311. To reinforce the pipeline, the composite wrap, Belzona SuperWrap II, was specified. Finally, the anti-corrosion coating, Belzona 5811 (Immersion Grade), was chosen to provide long-term corrosion protection.”
The Customer was able to successfully bypass the drawbacks associated with complete pipeline replacement by instead, opting to repair and protect the pipeline with a combination of polymeric technology. As well as making huge financial savings, this solution enabled the customer to also minimize its environmental impact as well.
As the oil and gas industry continues to decarbonize, this latter point is particularly paramount. Polymeric technology is an extremely viable way in which oil and gas asset managers can make great strides in mitigating the carbon footprint of their facilities. An increased uptake in the use of cold-applied repair composites and protective coatings would help to accelerate the decarbonization of this industry.
Comments