Corrosion
U.S. Allocates $196 Million for Natural Gas Pipeline Modernization
The funding, part of President Biden's Bipartisan Infrastructure Law, will support 60 projects aimed at enhancing safety, reducing environmental harm, and lowering energy costs by replacing leak-prone pipelines.
Heavily Corroded Half-Mile Oil Pipeline Restored with Composite Wrap
An underground oil pipeline at a Refinery in Spain was suffering from severe corrosion. If left unchecked, the pipeline, 2,860.8 feet (872 meters) in length, would have incurred severe metal loss.
Building a Better Mousetrap for Coating Pipeline Girth Welds
The pursuit of building a better mousetrap can often pay off in big ways in terms of efficiencies. Such a productivity payout was the goal for finding a better solution for coating pipeline girth welds in the field – a solution that would speed up the coating process per weld.
Coating System Takes Aim at Metal Loss in Fracking Operations Pipes
An original erosion-resistant coating (ERC) establishes a new category with a system that resists erosion inside pipes located near fracking wellheads, thereby reducing downtime maintenance costs and enhancing drilling productivity.
Corrosion Control: Options for Combating Damage Due to Black Powder in Pipelines
Black powder (BP) is an industry name for the abrasive, reactive particulate contamination present in all gas and hydrocarbon fluid transmission lines. Black powder ranges from light brown to black, and the mineral makeup varies per production field around the world.
Corrosion Control: Enhancing Protection for Tanks and Pipelines with VCIs
Vapor corrosion inhibitors (VCIs) offer a complementary solution to traditional corrosion protection methods, enhancing the defense of tanks, pipelines, and insulated surfaces in hard-to-reach areas.
Pipeline Integrity: Improving Data to Identify Selective Seam Weld Corrosion
Learn about the importance of detecting and managing Selective Seam Weld Corrosion (SSWC) in pipelines. Discover how advanced technologies like SpirALL MFL are helping ensure pipeline safety and integrity.
Pipeline Efficiency: Enhancing Bearings with Surface Preparation and Coatings
Surface preparation and coatings enhance the performance and lifespan of industrial bearings in pipelines. Techniques like shot blasting and advanced coatings provide superior wear and corrosion protection, reducing downtime and maintenance costs. Explore methods to boost pipeline efficiency.
Leak Detection: Navigating Industry Evolution Through Adaptive Technology
To maintain innovation and growth while avoiding potential disruption, the governing bodies responsible for regulation and processes within the pipeline industry are expected to anticipate change and implement the appropriate solutions.
Selection of Material for Hydrogen Services
(P&GJ) — The use of the existing natural gas transportation pipelines for hydrogen gas is an essential strategy to reduce the investment required for hydrogen distribution. However, the existing gas transmission pipelines are generally comprised of steels that are susceptible to hydrogen embrittlement.
Asbestos Pipe Abatement Possibly Simplified
(P&GJ) — From 1914 until 1988, asbestos was just an accepted part of life and industry, and even at the end of that span, the only requirement by the EPA was the reporting of asbestos used in some products.
AMPP Unveils New Guide to Enhance Pipeline Safety Through Corrosion Control
AMPP unveils a comprehensive guide to enhance pipeline safety through corrosion control, aligning with the latest PHMSA regulations. Developed by industry experts, the guide offers practical strategies for U.S. gas transmission operators and valuable insights for international counterparts, all aimed at safeguarding pipeline integrity.
Experts See Polymers Among Keys to Better Pipe Protection
Leaders within the coatings industry have indicated that there are a number of innovative products and services that have been developed recently, which enhance corrosion control and provide better pipeline coatings.
Common Challenges with Field-Applied Liquid Epoxy Pipeline Coatings
Coatings are an incredibly important part of maintaining safe pipeline operations and asset integrity, including being a first line of defense against corrosion and corrosion-induced failures.
Using Integrated Approach Toward Geohazard Threat Management
In a recent advisory bulletin (ADB-2022-01, Potential for Damage to Pipeline Facilities Caused by Earth Movement and Other Geological Hazards), PHMSA highlighted the importance of proactive integrity management, to reduce the potential for damage to pipeline facilities caused by earth movement or other geological hazards, collectively referred to as “geohazards.”
Protection in Renewal Biogas Systems for Increased Pipeline Reliability
Biogas is a renewable fuel generated through the anaerobic fermentation of organic matter. Biogas is a mixture of gases, mainly methane and carbon dioxide, accompanied by trace elements dependent on the feedstock and production method.
Case Study: Identification, Sizing Accuracy for UTCD In-Line Inspection
One of the most pressing concerns for operators of liquid buried pipelines is the management of stress corrosion cracking (SCC). Detecting and sizing SCC in liquid pipelines is usually accomplished through ultrasonic crack detection (UTCD) in-line inspection tools.
Oxygen Corrosion Control for Multiphase, Gas Phase Pipelines
(P&GJ) — The oil and gas industry is committed to driving greater production and transportation from existing infrastructure, and ensuring effective asset integrity and flow assurance is essential to this objective.
Internal Corrosion’s Threat to Pipeline Integrity
(P&GJ) — Pipeline integrity is critical for ensuring the safe transportation of oil and gas products. Internal corrosion is an element of pipeline integrity that poses a significant concern for operators. According to PHMSA, “internal corrosion historically accounts for approximately 60% of all pipeline incidents caused by corrosion in transmission and gathering pipelines.”
Residual Stress in Predicted Failure Pressure Calculation—Part 2
(P&GJ) — An objective was to determine residual stress values corresponding to target probabilities, such as the 90th percentile. Every reference reviewed reported maximum stress levels, but only one-third of the references presented other residual stresses as they vary with position in the pipe.
PLIDCO Introduces Hydrogen-Compatible Fittings for Pipeline Maintenance and Repairs
(P&GJ) — The Pipe Line Development Company (PLIDCO) has launched a new range of products for use with hydrogen pipelines in response to the emerging transition toward hydrogen and other alternative energy sources.
TC Energy's Coastal GasLink Pipeline Fined for Environmental Non-Compliance
British Columbia has fined Coastal GasLink, the natural gas pipeline being built by TC Energy, $256,810 for non-compliance with environmental regulations, the Canadian province said on Thursday.
Boosting Pipeline Performance and Savings with Dual-Layer Barrier Systems
Oil and gas pipelines take a beating – both before and after they’re installed underground. From transportation and storage to installation and service, pipes face potential scrapes, impacts, flexions and more. These stresses threaten the integrity of the pipes themselves and, especially, the external barrier systems that protect pipes from corrosion.
Fatigue, Burst Tests Among Best Ways Assess Pipeline Welds
(P&GJ) — All over the world, the pipelines of large diameter and relatively thin wall thickness are used to transport hydrocarbons. These pipelines or piping systems are usually comprised of girth welded joints.
Poland Detects Leak in Russia's Druzhba Oil Pipeline
Polish pipeline operator PERN said it had halted pumping through a section of the Druzhba pipeline, which carries oil from Russia to Europe, after detecting a leak in central Poland on Saturday, but it expects flows can be resumed on Tuesday.
Strengthening the Bond with Reliable Structural Adhesives
(P&GJ) — Most industrial maintenance or repair procedures involve welding or the use of mechanical fasteners as these can be perceived as easy and quick. However, while these procedures might initially seem to correct the issue but may cause more harm than good.
SLB and Eni Form Partnership for New Pipeline Monitoring Technology
(P&GJ) — The alliance covers the deployment of e-vpms technology for pipelines transporting liquid hydrocarbons and produced water and enables the detection of product loss attributable to external events such as attempted product theft or accidental impact, corrosion related leak events, and land movement events caused by earthquakes or landslides.
Importance of Moisture Analysis in Pipeline Transportation
(P&GJ) — Nearly every substance is affected by moisture, which can alter physical, chemical and electrical properties. When transporting hydrocarbons such as natural gas, the presence of moisture in the pressurized stream can create serious problems.
Offshore Pipeline Design for CCUS
(P&GJ) — Design and construction of CO2 pipelines are similar to natural gas transmission pipelines. However, there are differences like: thermodynamic modeling, blow down modeling, specifying the maximum water content, pipeline fracture propagation control, use of elastomer materials and performing a quantitative risk assessment, mainly related to release modeling and defining the allowable exposure limits. These factors require special attention for CO2 pipelines, when compared with natural gas.
Control Rooms: Achieving SCADA Operational Readiness, Compliance
(P&GJ) — Implementing a comprehensive control room management (CRM) plan in today’s energy market can be a challenging task in that integrating it with modern supervisory control and data acquisition (SCADA) systems adds layers of complexity to the project’s implementation and compliance requirements.
- Trump Aims to Revive 1,200-Mile Keystone XL Pipeline Despite Major Challenges
- Valero Considers All Options, Including Sale, for California Refineries Amid Regulatory Pressure
- ConocoPhillips Eyes Sale of $1 Billion Permian Assets Amid Marathon Acquisition
- ONEOK Agrees to Sell Interstate Gas Pipelines to DT Midstream for $1.2 Billion
- Energy Transfer Reaches FID on $2.7 Billion, 2.2 Bcf/d Permian Pipeline
- U.S. LNG Export Growth Faces Uncertainty as Trump’s Tariff Proposal Looms, Analysts Say
- Tullow Oil on Track to Deliver $600 Million Free Cash Flow Over Next 2 Years
- Energy Transfer Reaches FID on $2.7 Billion, 2.2 Bcf/d Permian Pipeline
- GOP Lawmakers Slam New York for Blocking $500 Million Pipeline Project
- Texas Oil Company Challenges $250 Million Insurance Collateral Demand for Pipeline, Offshore Operations
